A Brief History of Hydraulic Fracturing

 

alt

Hydraulic fracturing, or “fracking,” is a stimulation process used to extract natural gas (and in some cases oil) from deep reserves 5,000-8,000 feet below the ground surface.  This process allows energy companies to access previously unavailable energy sources in California and other states.

The fracking process involves pumping water, chemicals and sand (proppant) slurry at high pressure into a well, which fractures the surrounding rock formation and props open passages, allowing natural gas to more freely flow from rock fractures to the production well.  The chemicals used in this process include but are not limited to: benzene, gelling agents, crosslinkers, friction reducers, corrosion inhibitors, scale inhibitors, biocides and, in some cases, diesel fuel.

Once the well is developed, the carrying fluid can then flow back to the ground surface along with the gas. However, in most cases, only 20-40% of the carrying fluid flows back to the surface and the rest remains deep in the ground. Initially, the technology used 20,000 to 80,000 gallons of water  per well, but todays advanced fracturing techniques can use up to 8 million gallons of water  and  75,000 to 320,000 pounds of sand (proppant) per well.

alt

Despite a history that can be traced back to the 1940s, hydraulic fracturing had not been utilized on a massive scale until 2003, when energy companies began actively expanding natural gas exploration with an emphasis in shale formations in Texas, Pennsylvania, West Virginia, Wyoming, Utah and Maryland.

Expansion was aided by a landmark study conducted by the EPA in 2004 which found that hydraulic fracturing posed no threat to underground drinking water supplies.  Shortly afterwards, hydraulic fracturing was exempted from the Safe Drinking Water Act by the Bush administration in the Energy Policy Act of 2005.

As the utilization of hydraulic fracturing grows, so does the level of controversy over the practice within the media and neighboring communities. Chief concerns include the high consumption of water resources, the generation of large volumes of wastewater, the irreversible injection of  chemicals deep underground and their potential impact on drinking water and surface water resources.

In 2010 the Awareness of Chemicals Act, a bill to amend the Safe Drinking Water Act, was presented to legislators to repeal the 2005 exemption for hydraulic fracturing.  In addition, the EPA asked the companies that perform hydraulic fracturing to turn over data related to their procedures and information on the chemical composition of fracking fluid and its effects on human health and the environment.

Furthermore, the EPA’s Office of Research and Development began conducting a scientific study to investigate the possible relationships between hydraulic fracturing and drinking water, with the intent to identify potential risks associated with hydraulic fracturing in order to  continue protecting national resources and neighboring communities.  The final study results are expected to be released in 2012.

Although fracturing has long been used by California oil operators in drilling operations, to date, hydraulic fracturing has not received the same level of media and regulatory attention that it has in New York and Pennsylvania. Despite this, new state regulations are being drafted to further investigate this issue.

On June 1st, 2011, the California Assembly passed Assembly Bill 591, which would impose a number of new public disclosure requirements on operators conducting hydraulic fracturing operations in California. On June 14th, the bill passed the Senate Natural Resources and Water Committee, but was referred back to the Senate Committee on Environmental Quality.  As of now, a date for further review of the bill has not yet been determined.

Hydraulic fracturing has become a key element of natural gas development worldwide, and countries such as Canada, India, England and China are actively pursuing implementation of this technology to tap into this new source of energy.  Nationally, hydraulic fracturing has brought jobs and revenue to remote rural areas and increased revenues in several states.  However, like any advanced technology, it has also raised questions about its long-term impact on the environment.   We expect research and debate to continue well into the future and we will follow up with new and upcoming regulations.

Featured Projects

2.5 MGD Industrial/Municipal Wastewater Treatment System Design-Build

Industry: Oil Refinery

After conducting a comprehensive feasibility study and cost/benefit analysis, EEC designed a 2.5 million gallon per day (MGD) wastewater treatment plant at a refinery in China to meet new stringent discharge standards.

Project Highlights
  • Designed a 2.5 MGD treatment system
  • Provided turnkey feasibility study, design, equipment procurement, construction management, start-up, and operator training
  • Completed physical, chemical, and biological treatment for oil and grease, toxic organics, suspended solids, ammonia, chemical oxygen demand (COD), and biochemical oxygen demand (BOD)
  • Constructed stormwater diversion and treatment

Pretreatment Program Upgrade

Industry: Municipal Wastewater

EEC was retained by a large city in the western United States to respond to a state audit and notice of violation (NOV) that required an extensive upgrade of the City's pretreatment program. EEC is working side-by-side with the City to upgrade its legal authority, develop new local limits, issue industrial user permits, and provide inspector training.

Project Highlights
  • Pretreatment program assessment
  • Pretreatment ordinance and local limits development
  • Key program documents and procedures development
  • Industrial waste survey development and implementation
  • Significant industrial user (SIU) permit review and revision


Chemicals of Emerging Concern Study

Industry: Pharmaceutical

 

EEC conducted a comprehensive study of chemicals of emerging concern for a large pharmaceutical manufacturer. The study analyzed endocrine-disrupting effects of key chemicals used in the company's drug manufacturing processes. EEC investigated the potential adverse impacts of the manufacturer's effluent on the local publicly owned treatment works (POTW) processes, as well as acute and chronic impacts on the aquatic life in the POTW receiving waters. The study resulted in a phased raw material substitution and new best management practices to prevent harmful discharges.

Project Highlights
  • Chemical usage and manufacturing processes evaluation
  • Research on endocrine-disrupting effects and European Union and USEPA discharge standards requirements
  • POTW removal efficiency evaluation and projections
  • On-site treatment feasibility analysis
  • Corporate-wide raw material substitution plans


Water/Wastewater GIS Data Development and Conversion

Industry: Water Resources

EEC has been providing GIS services to the City of Santa Ana’s Water Resources Division since 2004. EEC developed a database and data entry procedure that transferred data from old water service index cards to digital data, complete with GIS representations. The partially automated database and data entry process allowed the Division to quickly enter information, reducing the time needed to enter tens of thousands of records. This water service data can now be queried in the GIS. EEC has also assisted Santa Ana in creating GIS feature classes based on existing tabular data. EEC has developed two methods for creating water or sewer laterals feature classes. These methods have a significant amount of automation which reduces the manual effort necessary to create service laterals.

Project Highlights
  • On-site GIS support
  • Geodatabase editing
  • Feature class development automation
  • Map document development
  • Software implementation and update
  • Graphical user interface development
  • Customized tool development
  • Massive data migrations


Wastewater Work Order and Asset Management System

Industry: Municipal Wastewater

EEC is in the process of developing a work and asset management system for Costa Mesa Sanitary District (CMSD). The computerized maintenance management system (CMMS) at the heart of the system is Azteca Systems’ CityWorks. The system is being developed in conjunction with an EEC-designed geographic information system (GIS), using Esri’s ArcGIS. The GIS and CMMS will be seamlessly integrated to revolutionize the way CMSD manages day-to-day operations and plans for the effective use of its wastewater collection system.

Project Highlights
  • State-of-the-art CMMS utilizing CityWorks technology
  • Seamless integration with existing wastewater collection network GIS based on industry standard data models
  • Full integration with Esri’s ArcGIS platform
  • Foundation for future system expansion that includes mobile, web, and modeling technologies
  • Wastewater Treatment

  • Pretreatment Program

  • Chemicals of Concern

  • GIS Data Development

  • Asset Management

Featured Projects - Shadow Padding

Latest News

  Hydraulic fracturing, or “fracking,” is a stimulation process used to extract natural gas (and in some cases oil) from deep reserves 5,000-8,000 feet below the ground surface.  This process allows energy companies to access previously unavailable energy sources in Californi...
Read More

Office Locations

EECWorld Los Angeles OfficeLos Angeles Area Office
501 Parkcenter Drive
Santa Ana, CA 92705
Phone: (714) 667-2300
Fax: (714) 667-2310
EECWorld Mid-Atlantic OfficeMid-Alantic Office
200 Harry S Truman Parkway Suite 330
Annapolis, MD 21401
Phone: (410) 263-2234